Zipper Style Pillow Cover Tutorial

Make it stand out

Whatever it is, the way you tell your story online can make all the difference.

You’re not going to believe just how easy it is to make a pillow cover for any size square or rectangle shaped pillow.

I have outlined the steps below. This should only take you about a 1/2 hour and just about anyone with any sewing skills at all will be able to do this.

Supplies:
-1 Yard of Fabric (per 16″ pillow)
-1 Invisible Zipper or Dress Zipper 16” or longer
-Matching Color Thread

Tools:
-Sewing Machine
-Scissors -Straight Pin
-Iron

Step 1. Measure the pillow you are going to cover and write down the width (w) and height (t) of your pillow.

Step 2. Cut fabric to use for the front & back of the pillow. The measurement for both the front and the back should be 1 inch wider and 1 inch taller than your pillow (1/2 inch larger on each side for seam allowance).

For Example if your pillow is 18 inches x 18 inches, your pillow cover pieces will be 19 inches x 19 inches.

Step 3. With the right side of the zipper facing the right side of the fabric, place zipper along top edge of the front fabric piece. Secure with straight pins and stitch it into place, stitching along the zipper tape that is closest to the top edge.

Step 4. With the right side of the zipper facing the right side of the fabric, place the other side of the zipper along top edge of the back fabric piece. Secure with straight pins and stitch it into place, stitching along the zipper tape that is closest to the top edge.

Step 5. Open the zipper about 1/2 of the way.

Step 6. Place the right side of the pillow back and the right side of the pillow front together and secure with pins so all the sides line up.

Step 7. With 1/2 inch seam allowance, sew the back piece to the front piece along the sides that don’t have a zipper. You will want to sew and back stitch over the zipper ends.

Step 8. Open the zipper the rest of the way, turn pillow cover right side out and iron.